Encoders and other Measuring Equipment

• Connectivity: coupling connected with moving parts.
• Measuring standard: DIADUR grating on silica glass, with a 10 μm grating interval.
• Accuracy: ± 5 μm.
• Reference: approximately 1.7 mm from the top.
• Measurement range: 60 mm.
• Needed measurement force: 0.1 to 0.6 N.
• Allowed radial force: ≤ 0.5 N.
• Operating temperature range: 10 to 40 ºC.
• Reference temperature: 20 ºC.
• Incremental signals: sinusoidal 11 μA­­­­­_PP.
• Mechanically allowed measurement speed: ≤ 18m/min.

• Actuation: with machine moving parts.
• Connectivity: clamping arm Ø8h8.
• Measurement standard: DIADUR phase grating on glass-ceramic ZERODUR, with a 4 μm grating interval.
• Accuracy: ± 0.2 μm.
• Reference: approximately 1.7 mm from the upper stop.
• Measurement range: 25 mm.
• Required measuring force:

– Vertical downwards: 0.6 N.
– Vertically upwards: 0.28 N.
– Horizontal: 0.44N.

• Allowed radial force: ≤ 0.8 N.
• Operating temperature range: 10 to 40 ºC.
• Reference temperature: 20 ºC.
• Incremental signals: sine 1 V­­­­­_PP.
• Mechanically allowed measurement speed: ≤ 30m/min.

• Resolution: analog 1 Vpp, 12 µA.
• Reference: magnetic actuator.
• Maximum speed: 10 m/s.
• Tolerance of measurement range: 0.8 ± 0.1 mm.

• Temperature:

– Resolution: 0.1° <99.9 then 1° >100.

– Interval of measurements: 0.5 s to 24 h.

– Accuracy: +/-0.5°C to 25°C.

– Measurement range: -40°C to +85°C.

• Humidity:

– Units: %rH.

– Resolution : 0.1 %rH.

– Interval of measurements: 0.5 s do 24 h.

– Accuracy: +/-2% to 50%rH.

– Measurement range: 0.1 to 100%rH.

• Height:

– Resolution:

• 0.1 m from -999.9 to 3000 m;
• 0.5 m from 3000 to 10000 m;
• 1 m from 10000 to 21535 m.

– Accuracy: 0.1 m – 1 m.

– Measurement range: -1000 to 21535 m.

• Wind:

– Resolution: 0.1 units.

– 0.1 to 25.0 Beaufort.

– Interval of measurements: real-time.

– Accuracy: +/-2%.

– Measurement range: 0 to 300 km/h.

• Accuracy: 0.01 mm/m.